Quality made
affordable with all
advantages
- A 2-axis Innova Digital Readout (DRO) with 5 and 10 µm. resolution (0.0002" and 0.0005")
- Two Scales with ± 10 µm./m. ± 0.00012"/ft.) accuracy and 3 m. (10 ft.) cables.
- A Digital Readout (DRO) holding arm.
- Brackets and screws to mount the scales.
- Installation and Operating manual.
- All this packaged in a single box.
- Universal Power Supply.
- Offers Absolute and Incremental reading per Axis.
- Saves setup time on tool changes as when worn out or broken.
- Performs precise machining with table sag compensation.
- Calculates the part center without requiring special accessories.
- Operates with Absolute as well as with Incremental (Floating Zero) coordinates.
- Is easy to install and use.
- Offers the DISPLAY-OFF mode, which keeps track of axes position while the display is off.
- Eliminates math calculations.
- Offers an unsurpassed Features/Quality/Cost ratio.
- It is FAGOR.
Fagor PRO Kits
featuring the Innova Digital Readout
For Mills
ProKit Models And Internet Pricing *
2 Axis Mill
Package Name |
Courses |
Price US $ |
PROKIT 01 |
12 X 30 |
$1,195 |
PROKIT 02 |
12 X 36 |
$1,195 |
PROKIT 05 |
16 X 36 |
$1,295 |
| |
|
|
3 Axis Mill
Package Name |
Courses |
Price US $ |
EXTREME 01 |
12 X 30 X 6 |
$1,795 |
EXTREME 02 |
12 X 36 X 6 |
$1,795 |
EXTREME 05 |
16 X 36 X 6 |
$1,845 |
* For other combinations
Contact Fagor for your local representative.
Main Characteristics
Scales:
Mechanical Specifications
Digital Readout:
In a sturdy industrial casting aluminum case.
- Reader head movement on roller bearings
- Accuracy: ± 10 µm./m. (±0.00012" /ft.)
- Maximum speed:
60 m./min. (197 ft./min.)
- Maximum vibration:
30 m./sec². (3G)
- Moving force: <1Kp.
- Sealing protection: IP 53.
- Ambient temperature:
0...50ºC (32º...122ºF).
- Storage Temperature:
-20...+70ºC (-4º...148ºF).
- Weight: 0.58 Kg. + 0.6 Kg./meter.
- 3m. (10 ft.) cables protected with metal tubing and plastic covering.
- State of the art VSI technology.
- DISPLAY-OFF mode.
- Auto Calibration
- Advanced error detection system
- Speed & Limit alarms
- Multi-point compensation
- Linear Hole Cycles
- Bolt-Hole Cycle
- Arc Cycle
- Table cosine (sag error compensation.
- Fine/Coarse display resolution selection from keyboard:
0.005/0.01 mm. (0.0002"/0.0005").
- Direct mm./inch. conversion.
- Part Centering.
- Axes count Reset (to Zero).
- Position preset with Recall.
- Operation in Absolute and Incremental
- Position value HOLD as assistance in tool change and part measuring.
- Auto-Test.
- Data battery back-up.
- Selectable AC Power voltages:
110/120/220/240 VAC (+10%-15%).
